Contribution to the non-destructive evaluation of bituminous mixes by electrical measurements

Messaoud Meymouna; Glaoui Bachir; Abdelkhalek Othmane; Rachid Rabehi

doi:10.18540/jcecvl8iss11pp16003-01e

Autores

Messaoud Meymouna Department of Civil Engineering / Reliability Laboratory of Materials and Structures in Saharan Regions (FIMAS), University of Tahri Mohamed Bechar, 08000, Algeria
Glaoui Bachir Department of Civil Engineering / Reliability Laboratory of Materials and Structures in Saharan Regions (FIMAS), Faculty of Technology, University of TAHRI Mohammed Bechar, 08000, Algeria
Abdelkhalek Othmane Smart Grids & Renewable Energies Laboratory (S.G.R.E), Faculty of Technology, Department of Electrical Engineering, University of TAHRI Mohammed Bechar, BP 417, Algeria
Rachid Rabehi Laboratory (LDMM), Civil Engineering Department, University of Djelfa, Algeria https://orcid.org/0000-0002-9398-7291

DOI:

https://doi.org/10.18540/jcecvl8iss11pp16003-01e

Palavras-chave:

Asphalt concrete, FENIX test, Electrical resistivity, Conductive additives, Mechanical and electrical properties

Resumo

The incorporation of additives into bituminous mixes is a very important technique for improving the mechanical and electrical properties of the pavement body. The purpose of this work is to present and interpret the different results of the tests carried out in the laboratory; such as FENIX direct tensile test and electrical resistivity test. In this work, we will present comparative studies between the mechanical and electrical characteristics of bituminous mixes based on conductive additives (steel fibers and graphite powder). This comparison makes it possible to classify these resulting materials as materials that have the ability to respond to different multifunctional applications.