STOCHASTIC MODELING OF LIVING/CONTROLLED COPOLYMERIZATIONS IN TUBULAR REACTORS WITH LATERAL FEED

Autores

  • Matheus Dias de Carvalho Federal University of Viçosa, Chemical Engineering Program https://orcid.org/0000-0002-2531-4466
  • Tiago Silva Miranda Lemos Federal University of Rio de Janeiro, Chemical Engineering Program/COPPE, University City, Technology Center https://orcid.org/0000-0002-0327-7545
  • Jorge David Alguiar Bellido Federal University of São João Del-rei, Campus Alto Paraopeba (CAP), Ouro Branco
  • Antonio Marcos de Oliveira Siqueira Federal University of Viçosa, Chemical Engineering Program https://orcid.org/0000-0001-9334-0394

DOI:

https://doi.org/10.18540/jcecvl6iss2pp0129-0138

Palavras-chave:

Polymerization, Monte Carlo, Microstructure, Stochastic

Resumo

It is known the controlled microstructure polymers production increase in continuous reactors due to all industrial advantages that this type of operation presents. In this paper, the synthesis via Nitroxide-Mediated Polymerization (NMP) of copolymers based on styrene and methyl methacrylate accomplished in a tubular reactor with lateral feed is modeled by Kinect Monte Carlo (kMC). This reactional configuration aims the copolymers production with originals microstructure and applications. There were obtained all the microstructural properties distributions of the synthesized material at interest and the conversion values, Polydispersity Index (PDI) and chains average molar mass are compared to experimental data. The conversion presented minimum and maximum deviation in the module of 0.61 and -21.85%, respectively. For the PDI and the molar mass, there were obtained minimum and maximum errors of 0.72%, 1.50%, -23.10% and 1.77%, respectively. It was verified that the formed product differed from the expected one in experiments. There were found copolymers of polystyrene-b-poly(methyl styrene-rand-methacrylate), not being found any region that presented composition gradient through the chains, differently than it had been foreseen in the experimental synthesis, results that show the relevance of a stochastic simulation in the process to make decisions in the context of polymer reaction engineering.

Downloads

Não há dados estatísticos.

Downloads

Publicado

2020-06-17

Como Citar

Carvalho, M. D. de ., Lemos, T. S. M. ., Bellido, J. D. A. ., & Siqueira, A. M. de O. (2020). STOCHASTIC MODELING OF LIVING/CONTROLLED COPOLYMERIZATIONS IN TUBULAR REACTORS WITH LATERAL FEED. The Journal of Engineering and Exact Sciences, 6(2), 0129–0138. https://doi.org/10.18540/jcecvl6iss2pp0129-0138

Edição

Seção

General Articles

Artigos mais lidos pelo mesmo(s) autor(es)

<< < 2 3 4 5 6 7 8 > >>